SERVICE
Maintenance

Baoliya solid surface is resistant to daily wear and tear including scratches and cuts. Excellent Repair ability Baoliya? Solid surface is renewable, normal scratches and cuts or even cigarette burns can be simply restored with ordinary mild abrasive cleansers and abrasive pads. Damage caused by abuse can be also easily repaired on the spot.

Baoliya? solid surface is designed for carefree maintenance. Just follow the simple how to clean guidelines below to keep your Baoliya? solid surface looking fresh and smart for years to come.

EverydayCare:General cleaning of Baoliya? solid surface can be done by wiping the surface with a damp cloth or sponge, and using soapy water or common household cleaners like ammonia-based “cleaners, then dry with a soft cloth or paper towels to prevent spotting, especially in areas with hard water.

Contaminants that can be cleaned with water: ordinary alkaline solution,coffee,juice ,milk, household soap, hydrogen peroxide, nail polish remover, olive oil, soy sauce, shoe polish, synthetic detergents, tea, vinegar and water-soluble ink.

Wipe Baoliya? solid surface with diluted household bleach〔water: bleach solution in 1:1 ratio〕 once or twice a week.Rinse the surface thoroughly with water and wipe completely dry.

Disinfection:Wipe Baoliya? solid surface with diluted household bleach 〔water: bleach solution in 1:1 ratio〕once or twice a week.Rinse the surface thoroughly with water and wipe completely dry.

Stubborn stains:Matt finish: Scrub in a small circular motion with a wet sponge and an abrasive cleanser such as Soft Scrub?. Dark colors tend to require more attention than light colors.

Semi-gloss/Satin surface: Lightly scrub surface in a small circular motion with a wet sponge and an abrasive cleaner such as Soft Scrub? over stain or scratch. Dark colors tend to require more attention than light colors. Scrubbing too aggressively may actually reduce the gloss level.

High-Gloss finish: Spray a non-abrasive product such as Formula 409? over stain and wait for a couple of minutes. Then, scrub in a small circular motion with a wet sponge. Dark colors tend to require more attention than lighter colors. Scrubbing too aggressively may actually reduce the gloss level. Do not use abrasive cleansers, pads or steel wool.